Power Requirements:
120 V ac: | 20 Amp, 60 Hertz
*20 Amp Dedicated Line Required (cannot share neutral line) ** Reason: If you have 120 Volts out of the outlet and more than one major appliance on the hot or neutral line, the voltage will drop more than 10% below the minimum of 120 volts and the treadmill will shut down and reset. |
| 208 V ac: | 15 Amp, 60 Hertz
*At least 208 volts out of the outlet ** Reason: If you do not have a minimum of 208 volts out of the outlet, the treadmill may shut down due to not having the proper voltage to operate. Once the treadmill pulls voltage more than 10% below the 208 volts and the treadmill will shut down and reset. This voltage is also needed to run a treadmill at speeds in excess of 15.0 MPH. |
| 220 V ac: | 15 Amp, 60 Hertz
*At least 220 volts coming out of the outlet ** Reason: If you do not have a minimum 220 volts out of the outlet, the treadmill may shut down due to not having the proper voltage to operate. Once the treadmill pulls voltage more than the 10% below the minimum of 220 volts and the treadmill will shut down and reset. This voltage is also needed to run a treadmill at speeds in excess of 15.0 MPH. |
| Motor Specifications: | DC with encoder, 2HP, 5 Hp peak |
| Incline Type: | Rack and Pinion |
Power Cord and Type:
120 V ac
208/220 V ac | 10 feet, 3 prong
5-20P
6-20P |
| Wall Outlet Requirements: | |
| 120 V ac |  NEMA 5-20R Receptacle
(**Dedicated circuit required**)
|
| 208/220 V ac |  NEMA 6-20R Receptacle
(**Dedicated circuit required**) |
Main Fuse:
120 V ac input
208/220 V ac
ODYSSEY(120 V) |
15 A slo-blo, 3AG
10 A slo-blo, 3AG
5 A slo-blo, 3AG |
Heart Rate
Pickup Assembly:
Pickup Range
Heart Rate Range |
Up to 30 inches
Up to 200 Beats per Minute; Uni-directional |
Electrical Requirements
The maximum electrical power requirements of your treadmill at top operating speed is 20 A at 120 V ac. Therefore, the operating area must be equipped with an approved, dedicated 120 V ac, 60 Hz NEMA 5-20R Grounded outlet and properly fused - cannot share the neutral! If an extension cable is needed, it must be at least 12 AWG with ground and no more than 10 feet long. For the 208 or 220 V ac input power options, the outlet must provide the appropriate ac voltage, 60 Hz at 15 A.
Outlet Compatibility
The 120 V ac input Woodway treadmill comes standard with a 3-prong plug (NEMA 520P). The only outlet that the plug can be installed is a NEMA 5-20R - which does not share the neutral.
The 208 V or 220 V ac input Woodway treadmill has a 3-prong plug (NEMA 6-20P). It will only fit in a NEMA 6-20R outlet. DO NOT BEND OR REMOVE PRONGS. If other power cord plugs are required, please consult the factory.
DESMO M/Mercury M/Wide Path M Models: The 120 V ac input Woodway treadmill comes standard with a 3-prong, hospital-grade (NEMA 5-20P). The only outlet that the plug can be installed in is a NEMA 5-20R receptacle that does not share the neutral. Note: For grounding reliability, only connect to the proper receptacle marked "Hospital Grade."
|
| 110 Electrical Specifications |
| 220 Electrical Specifications |
| ELG/Blade Electrical Specifications |
